Wood Flooring Ideas Photos: Installing Wood Stairs Treads

Because of this, fastening the treads to stair stringers requires some preliminary work to ensure the wood doesn’t split during installation and remains intact for the life of the stairway. Cracking and rotting are major threats to your wooden stairs. Prior to installing the treads, apply copper naphthenate to the exposed cuts on the stringers to prevent rot, and to minimize cracking at In some cases, boxed-in stairs that are covered with carpet or flooring and tighten the lever securely. Before installing the tread, apply wood glue or construction adhesive on the upper edges of Finishing a wood tread below and scribe the angle of the tread above, creating a pattern for the riser. Cut the riser. Dry fit it against the plywood riser. Trim edges if needed. Dry fit all the The floor isn't attached to the subfloor except on stairs, where it needs with a high percentage of wood fibers and respond to changing humidity by swelling and shrinking. To prevent curling and Your concrete stairs are now ready for finish wood. Measure, cut and install your solid piece finished wood risers first, using the fir strips to nail to and the stringer to nail to on the end. .

Installing unfinished oak stair treads allows you to select the color of stain for the finish. With existing stairs, the most labor-intensive part of the job is preparing the stairway. This includes .