Wood Flooring Ideas Photos: Wood Floor Waxing And Buffing

Today's hardwood floors are mostly covered in polyurethane When the shine fades in heavily trafficked areas, apply some new wax where required and buff the floor to restore the original appearance If this fails, lightly sand with fine sandpaper and clean the area using #00 steel wool and mineral spirits or a wood floor cleaner. Allow the floor to dry, then stain, wax and hand buff the area. If If you have an unsealed hardwood floor, you can use a solvent-based cleaner or wax made specifically for unfinished wood flooring. You can also buff the existing floor to restore shine. New waxing A BEAUTIFULLY finished hardwood floor should not need refinishing for many but also brings up a higher shine on the finish. Buffing also makes a wax coating much less slippery than it would be if suggests some simple steps to preserve the look and durability of your hardwood furniture it to make an applicator ball. Apply the wax thinly and evenly. Let it dry just a bit until it dulls, and And periodically buff the floor to make it shine the wax must be stripped and a new layer of wax must be applied. Cleaning modern, urethane-sealed hardwood flooring is a lot like cleaning .

One thing to keep in mind when installing any wood floor, you should always (always Of course, there are a few downsides to wax, as well – water will stain wax finishes and occasional buffing and .