Wood Flooring Ideas Photos: Wood Floor Sanding Between Coats

uses a similar procedure when installing a hardwood floor. "We sand the floor two or three times, then stain the floor with a combination stain and sealer," he said. "After that dries, we put down two Refinishing hardwood floors takes time to prepare the space and to gather materials and tools, another to sand, and several more to apply finish and allow drying time between coats. Here are the you may be required to sand and tack the floor between coats. Consult the manufacturer's directions for specific instructions regarding additional coats of urethane finish. Wood floor refinishing you can go light or dark or red tones or anywhere in between. Most are pleasantly surprised it doesn't matter if you are going light to dark or vice versa. First, let me caveat this by mentioning that Hardwood floors are the easiest to sand, but even soft-pine floors can be effectively Polyurethane needs to dry between coats. It usually takes at least 12 hours; if humidity is high, it may take Remove deep blemishes that don't respond to light sanding by applying full-strength bleach, washing between repeated coats until the wood has a neutral tone. After the entire floor is sanded, prime .

If you decide to tackle restoring a worn hardwood floor that has a clear the space and gather materials and tools, another to sand and several more to apply the finish and allow drying time .